Category >
ATV250 pressure plate
The substrate is obtained by impregnating a base material with
Key words:
Atv250
foaming
resin
a type
impregnation
containing
heating
cm
obtained
among
Classification:
Detailed Description
The laminate is obtained by impregnating a substrate treated with a solution containing alkoxy silane derivatives and/or their condensates with a thermosetting resin that does not contain halogenated flame retardants, followed by heating and drying to obtain a prepreg blank. Several sheets of this prepreg blank are overlapped, and copper foil is stacked on one or both sides as needed, then heated and pressed to form.
It includes: a foam board made of polypropylene resin; and a non-woven fabric, where the expansion ratio of the foam board is approximately 2-10, the pore diameter does not exceed 300μm, and the thickness h (cm) meets the following formula: (100/E(1-(1-1/x)↑))↑[1/3]≤h≤2, where E (kgf/cm↑) is the bending elastic modulus of a component that is intended to become the foam board but has not yet been foamed.
Related products
Car cover, also known as automotive outer cover
Car cover is a type of covering used to protect cars.
The disc spring is also known as a Belleville spring washer.
T100 cover pressure plate, disc spring
A disc spring is a special spring that has a conical shape in the axial

Contact Information
Contact Address

Shichang Group, Tongshanqiao Village, Xiyong Street, Shapingba District, Chongqing